Rheology Modifiers with Multiple Functions: Multicare and Hydrojel Series
- April 9, 2019
- Posted by: Jiamin Ng
- Category: BLOG, Care LS, Living Science, Personal Care
Looking for rheology modifier with excellent sensory profile and absorbility?
Rheology modifier is used very frequently in various skin care applications. It plays an important role in stabilising emulsion and controlling the flow of the product. Due to the economic reasons, many formulators seek for the rheology modifier with multiple functions but many do not find such one. However, we are able to provide one.
Our Solution: Multicare Series and Hydrojel Series
Multicare series has multiple functions as thickener, emulsifier and dispersing agent with superb skin absorbility. The series is very compatible with cream formulation. The recommended grade in the series is Multicare MP40KC. Multicare MP40KC is an anionic polymer with other multiple functions. The grade contains NON-TOXIC natural ingredients (Acrylamide and Ethylene oxide free), and it provides Soft and Silky feeling after the application.
On the other hand, Hydrojel series works the best in skin care applications as Thickener and Moisturizing agent. The series is suitable for Gel formulation!
Despite of these differences, both rheology modifier series are Easily Dispersible under cold process because of their Pre-neutralised liquid form! Most importantly, both provide Excellent Sensory feeling and Work Perfectly in wide range of pH level (4-9).
The prominent features of Multicare and Hydrojel Series
- Easy to use as it is already a pre-neutralized polymer in liquid form (water in oil emulsion) that works at a wide range of pH
- Can function in almost all kinds of oils and even at very low temperature
- Excellent pigment dispersant due to its lipodispersible characteristic
- Excellent texturizer with unique sensory profiles and superb skin absorption.
- Easy to use as it is already a pre-neutralized polymer in liquid form
- Similar texture as silicone oils
- Non drying & water soluble lubricant
- Excellent moisturizing and lubricating efficacy
The properties of Multicare series
|AM 50KC-S||MP 40KC||DA 40KC|
|Appearance||Fluid emulsion||Fluid emulsion||Fluid emulsion|
|Solubility||Dispersible in water, insoluble in ethanol, chloroform||Dispersible in water, insoluble in ethanol, chloroform||Dispersible in water, insoluble in ethanol, chloroform|
|Viscosity (Sol. 25°C)||80000(2%)||65000-90000 (2%)||70000-90000 (2%)|
|Solid content (%)||45-49||59-53||40-50|
|Stabilise pH range||4-9||4-9||3.5-4.5|
**With 2.5% of Multicare MP40KC, viscosity remains almost constant during and after manufacturing process over different range of temperatures and duration.
Success Application of Multicare Series
Moisturizing Sleeping pack and overnight mask
The Properties of Hydrojel series
|Hydrojel PFKC||Hydrojel OILPFKC|
|Appearance||Clear Viscous gel||Clear Viscous gel|
|Viscosity (cps)||200000-400000||500-1600 (5%)|
|Water content (%)||31-34||–|
|pH||5-6 (appropriate pH range for skin)||5-6|
|Application||Cream & lotion, Skin toner, cleansing gel, essence, soothing gel||Facial Masks, hair serum|
Success Application of Hydrojel Series
|PHASE||MATERIALS||FUNCTION||INCI NAME||Supplier||W/W %|
|Butylene Glycol||Humectant||Butylene Glycol||–||7.0|
|Tetrasodium EDTA||Chelating Agent||Tetrasodium EDTA||–||0.1|
|Water||Solvent||Water||–||Add to 100|
|B||Shea Butter Refined||Emmolient||Butyrospermum parkii (shea) butter||Henry Lamotte||1.0|
|Cetearyl alcohol||Base||Cetearyl alcohol||–||3.0|
|Glyceryl Stearate dan PEG-100 Stearate||Emulsifer||Glyceryl Stearate dan PEG-100 Stearate||–||3.0|
|Stearic acid||Emulsifer||Stearic acid||–||0.8|
|Hydrogel Oil PFKC||Moisturizer & Lubricat||Glycerin and Glyceryl Acrylate/Acrylic Acid Copolymer and 1,2-Hexanediol and PVM/MA Copolymer||KCl||0.7|
|C||Multicare AM 50KCS||Rheology modifier||Polyacrylamide (and) C13-14 isoparaffin (and) laureth-7||KCl||1.2|
|D||Tranex 1||Whitening agent||Tranexamoyl Dipeptide-23||ANPEP||3.0|
|E||Troycare PE 73||Preservative||Phenoxyethanol, Ethylhexylglycerine||Troy||0.8|
*Multicare AM 50KC-S has same benefits as MP40KC but it contains Acrylamide and Ethylene oxide.
- Heat phase A until the temperature is 70°C
- Heat phase B until the temperature is 70°C
- Add phase B to phase A and mix homogenously
- When the temperature of the mixtures reaches 40°C, add phase C and mix homogenously
- Add phase D, E and F step by step, continue mixing
End Product Appearance
|Viscosity, cps||42400 at #4,12rpm|
Features: Anti-aging, Anti-oxidant, Relaxing, pH 5.5-6.5
|PHASE||MATERIALS||FUNCTION||INCI NAME||Supplier||F/2E (%)|
|Butylene Glycol||Humectant||Butylene Glycol||–||3-5|
|B||Multicare AM 50KC-S||Thickener||Polyacrylamide (and) C13-14 isoparaffin (and) laureth-7||KCl||2-5|
|C||Serasense SF 6||Emmolient||Dimethicone||–||0.1-0.2|
|Serasense CM 56||Emmolient||Cyclomethicone||–||0.1-0.5|
|Phenyl Trimethicone||Emmolient||Phenyl Trimethicone||–||0.1-0.5|
|D||Evermild PGA||Moisturizer||92% γ-polyglutamic acid, water||SINO LION||0.1-0.2|
|E||Evening Primrose extract IN-BG-©||Active Ingredient||Oenothera biennis (evening primrose) flower extract, Butylene Glycol||TEN||0.3-0.5|
|Banana extract IN-BG-©||Active Ingredient||Musa sapientum (banana) fruit extract, Butylene Glycol||TEN||0.3-0.5|
|Watermelon extract IN-BG©||Active Ingredient||Citrullus Lanatus (Water Melon) Fruit Extract & Butylene Glycol||TEN||0.3-0.5|
|Seaweed extract IN-BG-©||Active Ingredient||Fucus Vesiculosus Extract & Butylene Glycol||TEN||0.3-0.5|
|F||Troycare PE 73||Preservative||Phenoxyethanol, Ethylhexylglycerine||Troy||0.8-1|
|G||Citric acid (50%)
Can replaced by Lactic acid
|pH adjuster||Citric acid, water||–||qs|
If you are interested in these products, please contact us via the button below.