The Importance of Minimum Film Forming Temperature in Latex Film Production
- April 1, 2019
- Posted by: MahaChem
- Category: BLOG, Engineering Material, Others, Rubber EM
Are you aware of Minimum Film Forming Temperature and its importance?
Southeast Asia is one of the biggest market for latex applications as the region has abundant resources to produce rubber, especially in Thailand, Malaysia, and Indonesia. As MahaChem has seen the industry as the big opportunity, MahaChem has worked closely with several big manufacturers in the latex application suppliers.
The film formation process of latex film involves mainly three steps :
- Evaporation of water from latex film.
- The latex particles come together and closely packed.
- The water continue to diffuse out of the latex film. The latex particles coalesced and joined together to form a continuous film.
However, in this process, Minimum Film Forming Temperature (MFFT) is very crucial.
What is Minimum Film Forming Temperature (MFFT)?
The MFFT indicates the temperature required for the latex to from a film. MFFT can be found in the technical data sheets of latex products.
If the MFFT of the latex is lower than the room temperature, it can form a smooth and continuous film at room temperature.
If the MFFT of latex is higher than the room temperature, the latex will not form a continuous film. It will form a cracked film.
What should one do in such case?
The Solution for Cracked Film: Coalescing Solvent
In this case, coalescing solvent is required to soften the latex particles so that they can coalesced to form a continuous film.
The below image shows a side by side drawdown of two latex films at room temperature. The MFFT of the latex is 30 °C and the room temperature is 25 °C. The latex film without coalescent has cracked. The latex film with 4% coalescent formed a continuous film. The amount of coalescent used is calculated based on latex solids.
MahaChem is distributing two brands of coalescing solvent, Maha Coalescent CS-12 and Maha Coalescing Solvent. The performance of both grades are equivalent to Texanol of Eastman Chemicals.
For more information on these products, please refer to the following:
For the further inquiries, please contact us below.