Select a Suitable Thickener for Acid Cleaners

Share on facebook
Share on linkedin
Share on whatsapp
Share on telegram
Share on email
cleaner
Acid cleaners are mainly used to remove mineral deposits, rust stains and hard water deposits. Some are effective in both cleaning and disinfecting surfaces. Since they are very irritating to the eyes, skin and throat, it is important for consumers to be extra careful when handling these products. To make them safer to use, formulators try to achieve high end product viscosity to prevent unwanted splashing. However, their extremely low pH poses a challenge to formulators selecting a suitable thickener for acid cleaners. Apart from high viscosity, other favourable properties that such products should have are longer dwell/contact time for vertical cleaning and good spreadability.

Problems with Current Thickening Solutions

Common rheology modifiers work within a narrow pH range and it can be difficult to find one that remains stable in products with extreme pH. Acid cleaners have very low pH. Hence, it is crucial to select thickeners that are stable as instability will shorten product shelf life, causing it to phase out.

Our Solution: Maha CP45

Maha CP 45 is a suitable thickener for acid cleaners and softeners.

Properties:
  • Thickener and softener for acidic aqueous system
  • Superior thickening ability in cationic detergents
  • Superior dispersibility in cold water
  • Easy to incorporate at any time during the formulation process without prior heating or neutralization
  • Good compatibility with cationic surfactants

Formulation Guide : Toilet Bowl Cleaner

Phase Material Chemical Name % W/W
A
Deionized Water
Deionized Water
q.s. to 100
Hydrochloric Acid, 36%
Hydrochloric Acid
20.0
Acrylamide / (2-acryloxyethyl)trimethyl ammonium chloride copolymer (and) Isoparaffin (and) Fatty alcohol polyoxyethylene ether
4.0

Procedures

  1. Add MAHA CP45 to deionized water.
  2. Add hydrochloric acid with gentle mixing.
  3. Blend until homogeneous.

Formulation Guide : Fabric Softener

Phase Material INCI Name Supplier % W/W
A
Deionized Water
Deionized Water
q.s. to 100
Maha FS90/FS90Y
Dialkylester ammonium methosulfate
Softener
5.56
Acrylamide / (2-acryloxyethyl)trimethyl ammonium chloride copolymer (and) Isoparaffin (and) Fatty alcohol polyoxyethylene ether
Thickener
0.7 – 1.2
DMDM Hydantoin
Preservative
q.s.
Fragrance
Fragrance
0.2

Procedures

Procedure for formula with Maha FS90:
  1. Mix Maha FS90 and water, heat to 50-60℃, stir until uniform; or heat Maha FS90 drum in heating room at 50-60℃, then heat water to 50-60℃, mix water and Maha FS90 90 to uniform.
  2. Cool to 45 ℃,
  3. Dilute Maha CP 45 to 5% solution, add into system, stir until uniform.
  4. Add the rest into system, stir until uniform.
Procedure for formula with Maha FS90Y:
  1. Mix Maha FS90Y and water at 25℃ or higher temperature, stir for 1-2 hours until uniform.
  2. Dilute Maha CP 45 to 5% solution, add into system, stir until uniform.
  3. Add the rest into system, stir until uniform.

Interested In Our Solutions?

Contact us now for free samples!

RELATED POSTS