BIOBASED Waterborne Alkyd for High Gloss Coatings

Share on facebook
Share on linkedin
Share on whatsapp
Share on telegram
Share on email

SYNAQUA® 4804 is an APEO and ammonia-free short oil alkyd emulsion designed for use in a wide variety of coatings in which performance similar to solvent-based alkyds are desired. SYNAQUA® 4804 is a product accredited 43% bio-based by USDA.

TYPICAL COATING APPLICATIONS

High gloss trim paints

Wall and Ceiling paints from
flat to a high gloss

Interior/ Exterior primers for wood and metal

Direct-To-Metal coatings with anticorrosion additives

Transparent and semi-transparent stains

PERFORMANCE BENEFITS

SYNAQUA® 4804 can help formulators achieve a wide range of desirable benefits in coating formulations as follows:

  • High gloss potential and excellent gloss retention
  • Very good hardness
  • Good adhesion to many substrates
  • Quick-drying time
  • Low yellowing
  • Good stability with anticorrosive pigments
  • Good application characteristics
  • Outstanding resin for blending with other technologies, including styrene acrylics, acrylics, and polyurethane dispersions.
Example of Paint Formulation with SYNAQUA® 4804 Waterborne Alkyd
PAINT CHARACTERISTICS
  • Density (g/cm³)
  • Weight % Solids (%)
  • Volume % Solids (%)
  • VOC (+ water) (g/L)
  • Brookfield viscosity at 10 rpm (mPa.s)
  • 1,3

  • 54

  • 41

  • < 1

  • 3800

DRY FILM CHARACTERISTICS
  • Solids Density (g/cm³)
  • PVC (minus additive) (%)
  • Gloss at 20°/60° 200μm wet on glass
  • Persoz hardness after 28 days (sec)
  • 1,7
  • 19
  • 95/99
  • 100μm wet on glass 120

To understand more about SYNAQUA® 4804, please contact our team of professionals at sales@mahachem.com

Want To Know More About Our Solutions?

We Offer A Wide Range Of Ingredients For Surface Technology Formulations!

Related Posts

Non-Isocyanate Acrylic Resins For 2k Coatings

Isocyanates are a family of highly reactive, low molecular weight chemicals. They are widely used in the manufacture of coatings such as paints and varnishes, and elastomers, and are increasingly used in the automobile industry, autobody repair, and building insulation materials. Spray-on polyurethane products containing isocyanates have been developed for a wide range of retail, commercial, and industrial uses to protect concrete, wood, plastics, and metals.

Read More »

EVOSOL™ Silane 661 To Improve Your Coating Performance

Silane is an inorganic compound with the chemical formula, SiH4. It is a colourless, pyrophoric, toxic gas with a sharp, repulsive smell, similar to acetic acid. Silane with alkyl groups is an effective water repellent for mineral surfaces such as concrete and masonry. Silanes with both organic and inorganic attachments are used as coupling agents.

Read More »

TYTAN™ For Heat Resistance Coatings

TYTAN™ PBT is largely used in formulating heat and corrosion-resistant paints. TYTAN™ PBT can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray.

Read More »

Polyurethane Dispersion For 1K Waterproofing Membrane

AQUACRYL™ PUD 6000 is a unique aliphatic polycarbonate polyurethane dispersion with outstanding hardness, excellent water, and alkali resistance, and good chemical resistance for use in various Industries. It is mainly used in concrete coatings, floor and wall coatings, multi-surface coatings, and wood coatings.

Read More »
ENCOR® R64G

ENCOR® R64G For Penetrating Wall Sealer

ENCOR® R64G is a fine particle size styrene acrylic copolymer with high molecular weight. It has good adhesion, high penetrating power, water resistance, and alkali resistance. It is specially designed for wall sealer application.

Read More »

Emulsofier FRI as Flash Rush Inhibitor

Emulsofier FRI is a flash rush inhibitor typically used in metal surface protection, waterborne metal coatings, and other water-based formulations. Maha Chemicals offer a solution for flash corrosion. Read more to find out more!

Read More »